A correctly installed Skid Plate can imply the difference between a rough ride and extreme engine damage. The purpose of the Skid Plate is to protect the Ranger’s engine from highway particles and off-street debris the truck drives over. If you go off-street together with your Ranger, a solid Skid Plate is a necessity. You should purchase an excellent skid plate from most 4×4 auto retailers. Anybody with fundamental auto-restore skills can set up a skid plate on a Ford Ranger in lower than one hour.
Ford Ranger Skid Plate Installation Instructions
1. Shove the wheel chocks in opposition to one of many Ranger’s back tires to maintain the truck from rolling. Raise the entrance end with the ground jack and support it on two jack stands, positioned under the physique rails.
2. Place the other two jack stands underneath the Ranger’s engine. Set the skid plate on these jack stands. Line the mounting holes on the skid plate with the manufacturing facility-drilled holes in the Ranger’s frame.
3. Bolt the skid plate to the Ranger’s body along with your socket set and the mounting hardware supplied with the skid plate.
4. Take away the jack stands from underneath the Ranger’s engine. Elevate the Ranger off the opposite two jack stands. Move the stands apart and lower the Ranger to the ground.
5. Transfer the wheel chocks away from the Ranger’s again tire before driving.
